Wissensdatenbank
Buehl, Kevin
11 Oktober 2017
24 November 2017
2.893

Wissensdatenbank

Cisco Catalyst 2960 Switch Firmware Upgrade durchführen

Firmware anzeigen


dir flash:
Directory of flash:/
2 -rwx 556 Mar 1 1993 00:01:05 +00:00 vlan.dat
3 -rwx 1543 Mar 1 1993 00:31:24 +00:00 config.text
4 -rwx 5 Mar 1 1993 00:31:24 +00:00 private-config.text
7 drwx 192 Mar 1 1993 00:09:39 +00:00 c2960-lanbase-mz.122-35.SE5

Firmware entfernen


delete /f /r flash:c2960-lanbase-mz.122-35.SE5


Firmware herunterladen


Kopieren Sie die .bin Datei auf einen TFTP Server und laden Sie diese wie folgt auf Ihren Cisco Switch:
copy tftp flash
Address or name of remote host []? 192.168.1.111
Source filename []? /C/cisco/catalyst_2960g-24tc-l/firmware/c2960-lanbasek9-mz.150-2.SE11.bin
Destination filename [c2960-lanbasek9-mz.150-2.SE11.bin]?
Accessing tftp://192.168.1.111//C/c2960-lanbasek9-mz.150-2.SE11.bin...
Loading /C/c2960-lanbasek9-mz.150-2.SE11.bin from 192.168.1.111 (via Vlan4000): !!!!!!!!!
[OK - 11832946 bytes]

11832946 bytes copied in 107.970 secs (109595 bytes/sec)

Firmware wechseln


conf t
boot system flash:c2960-lanbasek9-mz.150-2.SE11.bin
end
show boot
BOOT path-list      : flash:c2960-lanbasek9-mz.150-2.SE11.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
NVRAM/Config file
buffer size: 65536

copy run start
Destination filename [startup-config]?
Building configuration...
[OK]

Switch neustarten


reload
Proceed with reload? [confirm]

01:44:05: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.